The refrigerator still has groceries in it. There is a load of towels in the washer. And somewhere behind the dryer is a connection you have not looked at since installation.
These are easy things to leave until the last minute. They are also the things that can delay an appliance move before the crew has carried anything outside.
Preparing appliances for moving takes more than unplugging them. Whether you are leaving a Baltimore rowhome or moving between houses in Towson, give yourself time to empty, clean, and arrange any necessary servicing.
The right preparation depends on the appliance’s model and connections.
First, Confirm What Is Going and Who Is Disconnecting It
Before making arrangements, check that the appliances are yours to take. Review your sale agreement or lease rather than assuming the washer, dryer, or refrigerator goes with you.
Next, separate the moving work from the service work. Carrying an appliance is different from disconnecting a gas line, removing a built-in unit, or installing it at the next address.
Ask your mover exactly what the booking includes. Arrange a qualified appliance technician, plumber, or electrician for work outside that scope. Schedule disconnection before pickup and reconnection after delivery.
Find each model number and download its owner’s manual. Keep installation instructions handy, too; the moving or storage section may specify transport hardware, drainage procedures, and positioning requirements.
Refrigerator and Freezer: Start With the Food
A packed refrigerator is not ready to travel. Plan meals around what you already have, reduce frozen groceries, and arrange appropriate cold storage for anything you intend to keep.
Then work through these preparations:
- Empty every compartment. Check door bins, ice buckets, and the freezer drawer.
- Follow the manual’s shutdown and defrosting instructions. Start early enough for ice to melt and surfaces to dry.
- Clean the interior. Wipe shelves, drawers, seals, and any spills.
- Dry it thoroughly. Use towels to collect defrost water and protect the floor.
- Protect loose parts. Secure or separately pack shelves and drawers as the manufacturer directs.
If the refrigerator has an ice maker or water dispenser, arrange proper water-line disconnection. Tell the technician if the shutoff valve is difficult to reach or appears damaged.
Do not chip ice away with a sharp tool or improvise a faster defrosting method. Follow the appliance instructions.
Can a Refrigerator Travel on Its Side?
Plan for upright transportation. Some refrigerators must remain upright in the vehicle, and an exception for one model does not apply to another.
GE’s refrigerator moving instructions, for example, distinguish between refrigerator designs and specify upright transport for certain models. The same guidance also addresses restart timing after sideways transport. Moving Instructions
There is no single waiting period that fits every refrigerator. Check your model’s instructions before plugging it in at the new home. Once restarted, allow it to reach the proper storage temperature before returning food.
Washing Machine: An Empty Drum Does Not Mean It Is Drained
A washer can look empty and still hold water in its hoses or internal system. That matters when it is tilted, carried downstairs, or transported in freezing weather.
Finish laundry ahead of moving day. Then follow the manufacturer’s preparation procedure, arranging help if you are unfamiliar with the connections.
The preparation generally involves disconnecting power, shutting off the water supply, disconnecting and draining the hoses, and removing residual water as directed. Keep a bucket and towels available. Do not force a stuck valve or hose fitting.
Let the interior dry before transport. Package disconnected hoses and fittings in a labeled bag so they do not disappear among bathroom supplies.
For a winter move in Maryland, check the manual’s cold-weather storage or transport instructions. Do not assume ordinary draining covers every model’s winterization requirements. Whirlpool
Find the Washer’s Transport Hardware Before Pickup
Many front-load washers require model-specific shipping bolts to stabilize the internal assembly during transportation. These are easily misplaced after the original installation.
Look for them early. If they are missing, contact the manufacturer or an appliance service provider for the correct parts and installation instructions. A random bolt from the garage is not a substitute.
Whirlpool’s front-load washer moving guidance explains the role of shipping bolts. Other washers may use different packing or transport supports, so check your model rather than copying instructions from another machine. Whirlpool
Before the washer operates at the new address, its transport hardware must be removed as directed and the machine properly installed and leveled. Keep the hardware for the next move.
Dryer: Check the Connections Before You Schedule the Move
Tell your mover whether the dryer is gas or electric, stacked, or part of a single laundry tower. Steam dryers may also have a water connection that needs attention.
Empty the drum and clean the lint filter. Arrange proper disconnection of the power, exhaust duct, and any other connections before the appliance is moved.
Have a qualified professional handle gas disconnection and reconnection. Hardwired electrical connections also need appropriate professional attention. Avoid pulling the dryer away from the wall to investigate an unfamiliar connection yourself.
At the destination, the dryer needs compatible connections and a correctly installed, unobstructed exhaust system. The National Fire Protection Association’s dryer safety guidance recommends professional installation and servicing, including inspection of gas connections by a qualified professional. nfpa.org
Confirm the new laundry space is suitable before delivery, particularly when moving between homes with different utility hookups.
Measure the Route, Not Just the Appliance Space
A refrigerator may fit its kitchen opening but still struggle at a hallway turn. Measure doorways, stair landings, and tight corners at both properties.
Send your mover photos of the appliances and the carrying route. Mention basement stairs, narrow rowhome entrances, stacked units, and any doors that may need removal. Leave appliance-door removal to someone who understands the model’s wiring and water connections.
Clear the route before arrival and discuss floor protection. Do not drag an appliance across finished flooring to save a few minutes.
What to Tell Chesapeake Before Moving Day
When discussing specialty item moving, provide the appliance type, model, dimensions, photos, and access details. Explain whether it is disconnected, whether required transport parts are available, and who will handle installation afterward.
Ask Chesapeake Moving Co. to confirm the handling scope and any preparation still needed. For the rest of your household, our moving checklist can help you organize the broader move.
Call 410-620-8919 to discuss your appliances and moving plans. Sorting out the connections and preparation in advance gives everyone a clearer plan when the truck arrives.